Aug 221 min read

[MAGIC™-N5] Creating Wooden 3D puzzle with MAGIC™-N5

The new Co2 Laser Engraving Machine of REDT, MAGIC-N5!

It’s an engraving machine that can do both marking and cutting at the same time with its large work area.

For user safety, the device is equipped with a manual cover.

You can easily create designs using the camera.

Most important thing is, even beginners can easily create designs using the dedicated software 'Magic Engrave™' and it sends the designs directly to the machine for easy and convenient engraving and cutting for everyone.

The slot cover allows you to work with long materials without any issues.

Maximize convenience with wireless communication capabilities via Bluetooth and WiFi!

More smarter with the automatic material height measurement feature!

Marking process is precise, fast, and safe!!!

The touch LCD located on the front of the device allows you to check the engraver's status and settings.

The dust collector connected to the back of the worktable expels smoke and dust generated during work to maintain a clean working environment.

Let me introduce the process of making a puzzle out of wood using MAGIC™-N5.

Place the wood to be used for the project on the worktable.
Use the dedicated software MagicEngrave™ to load the design to the machine.
Use the black-and-white conversion feature to sharpen the outlines of the design.
(**If the image quality of the design is low, there may be issues with curved surfaces. In such cases, refine the design using Photoshop or an editing program, or convert it to a vector file before loading.)
Select [Single-Line Toolpath] to generate the toolpath.
After checking the cutting design, click on [MAGIC™-N5] in the [Connected Engraver] section at the right top to send the generated toolpath to the machine.
When you see the red laser pointer projected onto the wood to be cut, use the touch LCD to check the cutting area, then press and hold the [Start] button to begin the cutting process.